Author: e.aderhold

What is enabled by LLDP-MED? (Select two.)

A customer is concerned about me unprotected traffic between an AOS-CX switch and a gateway, running on AOS 10. What is a feasible option to protect this traffic?

How do you allow a new VLAN 100 between VSX pair inter-switch-link 256 for port 1/45 and 2/45?

Two AOS-CX switches are configured with VSX at the the Access-Aggregation layer where servers attach to them An SVI interface is configured for VLAN 10 and serves as the default gateway for VLAN10. The ISL link between the switches fails, but the keepalive interface functions. Active gateway has been configured on the VSX switches.

What is correct about access from the servers to the Core? (Select two.)

Your customer has four (4) Aruba 7200 Series Gateways and two (2) 7000 Series Gateways. The customer wants to form a cluster with these Gateways. What design consideration would prevent you from using all of those Gateways?

When setting up an Aruba CX VSX pair, which information does the Inter-Switch Link Protocol configuration use in the configuration created?

You need to drop excessive broadcast traffic on an ingress port or an ArubaOS-CX switch. What is the best feature to use for this task?

With the Aruba CX switch configuration, what is the Active Gateway feature that is used for and is unique to VSX configuration?

A customer is using a legacy application that communicates at layer-2. The customer would like to keep this application working across the campus which is connected via layer-3. The legacy devices are connected to Aruba CX 6300 switches throughout the campus.

Which technology minimizes flooding so the legacy application can work efficiently?

Your customer currently has Two (2) 5406 modular switches with MSTP configured as their core switches. You are proposing a new solution. What would you explain regarding the Aruba CX VSX switch pair when the Primary VSX node is replaced and the system MAC is replaced?

With the Aruba CX 6100 48G switch with uplinks of 1/1/47 and 1/1/48. how do you automate the process of resuming the port operational state once a loop on a client port is cleared?

A network engineer recently identified that a wired device connected to a CX Switch is misbehaving on the network To address this issue, a new ClearPass policy has been put in place to prevent this device from connecting to the network again. Which steps need to be implemented to allow ClearPass to perform a CoA and change the access for this wired device?
(Select two.)

A network administrator is attempting to troubleshoot a connectivity issue between a group of users and a particular server The administrator needs to examine the packets over a period of time from their desktop; however, the administrator is not directly connected to the AOS-CX switch involved with the traffic flow.
What statements are correct regarding the ERSPAN session that needs to be established on an AOS-
CX switch’? (Select two )

Which statements are true about VSX LAG? (Select two.)

You are helping an onsite network technician bring up an Aruba 9004 gateway with ZTP for a branch office The technician was to plug in any port for the ZTP process to start Thirty minutes after the gateway was plugged in new users started to complain they were no longer able to get to the internet. One user who reported the issue stated their IP address is 172.16 0.81 However, the branch office network is supposed to be on 10.231.81.0/24.
What should the technician do to alleviate the issue and get the ZTP process started correctly?

You are troubleshooting an issue with a pair of Aruba CX 8360 switches configured with VSX Each switch has multiple VRFs. You need to find the IP address of a particular client device with a known MAC address You run the “show arp” command on the primary switch in the pair but do not find a matching entry for the client MAC address. The client device is connected to an Aruba CX 6100 switch by VSX LAG.
Which action can be used to find the IP address successfully?

With the Aruba CX 6200 24G switch with uplinks or 1/1/25 and 1/1/26, how do you protect client ports from forming layer-2 loops?

The administrator notices that wired guest users that have exceeded their bandwidth limit are not being disconnected Access Tracker in ClearPass indicates a disconnect CoA message is being sent to the AOS-CX switch.
An administrator has performed the following configuration:

What is the most likely cause of this issue?

A company recently upgraded its campus switching infrastructure with Aruba 6300 CX switches. They have implemented 802.1X authentication on edge ports where laptop and loT devices typically connect. An administrator has noticed that for PoE devices the pons are delivering the maximum wattage instead of what the device actually needs Upon connecting the loT devices, the devices request their specific required wattage through information exchange

A company recently deployed new Aruba Access Points at different branch offices Wireless 802.1X authentication will be against a RADIUS server in the cloud. The security team is concerned that the traffic between the AP and the RADIUS server will be exposed.
What is the appropriate solution for this scenario?

Your customer is having connectivity issues with a newly-deployed Microbranch group The access points in this group are online in Aruba Central, but no VPN tunnels are forming.

What is the most likely cause of this issue?

Which feature supported by SNMPv3 provides an advantage over SNMPv2c?

A client is connecting to 802.1X SSID that has been configured in tunnel mode with the default AP-group settings. After receiving Access-Accept from the RADIUS server, the Aruba Gateway will send Access-Accept to the AP through which tunnel?

you are implementing ClearPass Policy Manager with EAP-TLS for authenticating all corporate-owned devices. What are two possible solutions to the problem of deploying client certificates to corporate MacBooks that are joined to a Windows domain? (Select two.)

Describe the difference between Class of Service (CoS) and Differentiated Services Code Point (DSCP).

When setting up an Aruba CX VSX pair, which information does the Inter-Switch Link Protocol configuration use in the configuration created?

You need to create a keepalive network between two Aruba CX 8325 switches for VSX configuration. How should you establish the keepalive connection?

Refer to the exhibit

With Core-1. what is the default value for config-revision?

You are working on a network where the customer has a dedicated router with redundant Internet connections Tor outbound high-importance real-time audio streams from their datacenter All of this traffic.
• originates from a single subnet
• uses a unique range of UDP ports
• is required to be routed to the dedicated router
All other traffic should route normally The SVI for the subnet containing the servers originating the traffic is located on the core routing switch in the datacenter What should be configured?

What is an OSPF transit network?

A customer just upgraded aggregation layer switches and noticed traffic dropping for 120 seconds after the aggregation layer came online again. What is the best way to avoid having this traffic dropped given the topology below?

With Aruba CX 6300. How do you configure ip address 10.10.10.1 for the interface in default state for interface 1/1/1?

What is an Aruba-recommended best practice for hardening that only applies to Aruba CX 6300 series switches with dedicated management ports?

Your customer is interested in hearing more about how roles can help keep consistent policy enforcement in a distributed overlay fabric How would you explain this concept to them?

In AOS 10. which session-based ACL below will only allow ping from any wired station to wireless clients but will not allow ping from wireless clients to wired stations”? The wired host ingress traffic arrives on a trusted port.

A system engineer needs to preconfigure several Aruba CX 6300 switches that will be sent to a
remote office An untrained local field technician will do the rollout of the switches and the mounting
of several AP-515s and AP-575S. Cables running to theAPs are not labeled.
The VLANs are already preconfigured to VLAN 100 (mgmt), VLAN 200 (clients), and VLAN 300 (guests)
What is the correct configuration to ensure that APs will work properly?

A)

B)

C)

D)

The customer needs a network hardware refresh to replace an aging Aruba 5406R core switch pair using spanning tree configuration with Aruba CX 8360-32YC switches What is the benefit of VSX clustering with the new solution?

A customer wants to deploy a Gateway and take advantage of all the SD-WAN features. Which persona role option should be selected?

You must ensure the HPE Aruba network you are configuring for a client is capable of plug-and-play provisioning of access points. What enables this capability?

Which method is used to onboard a new UXI in an existing environment with 802 1X authentication?

(The sensor has no cellular connection)

Which statements regarding Aruba NAE agents are true? (Select two )

Your customer has asked you to assign a switch management role for a new user. The customer requires the user role to only have Web Ul access to the System > Log page and only have access to the GET method for REST API for the /logs/event resource
Which default AOS-CX user role meets these requirements?

On AOS10 Gateways, which device persona is only available when configuring a Gateway-only group?

Due to a shipping error, five (5) Aruba AP-515S and one (1) Aruba CX 6300 were sent directly to your new branch office You have configured a new group persona for the new branch office devices in Central, but you do not know their MAC addresses or serial numbers The office manager is instructed via text message on their smartphone to onboard all the new hardware into Aruba Central
What application must the office manager use on their phone to complete this task?

Which component is used by the Aruba Network Analytics Engine (NAE)?

your customer has asked you to assign a switch management role for a new user The customer requires the user role to View switch configuration information and have access to the PUT and POST methods for REST API.
Which default AOS-CX user role meets these requirements?

A network administrator is troubleshooting some issues guest users are having when connecting and authenticating to the network The access switches are AOS-CX switches. What command should the administrator use to examine information on which role the guest user has been assigned?

You are are doing tests in your lab and with the following equipment specifications:
• AP1 has a radio that generates a 16 dBm signal.
• AP2 has a radio that generates a 13 dBm signal.
• AP1 has an antenna with a gain of 8 dBi.
• AP2 has an antenna with a gain of 12 dBi. The antenna cable for AP1 has a 4 dB loss. The
antenna cable for AP2 has a 3 dB loss.
What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for AP1?

What is true regarding 802.11k?

Which feature allows the device to remain operational when a remote link failure occurs between a Gateway cluster and a RADIUS server that is either in the cloud or a datacenter?

You are doing tests in your lab and with the following equipment specifications
• AP1 has a radio that generates a 10 dBm signal
• AP2 has a radio that generates a 11 dBm signal
• AP1 has an antenna with a gain of 9 dBi
• AP2 has an antenna with a gain of 12 dBi.
• The antenna cable for AP1 has a 2 dB loss
• The antenna cable for AP2 has a 3 dB loss
What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for AP1?

You are setting up a customer’s 15 headless loT devices that do not support 802.1X. What should you use?

How is Dynamic Multicast Optimization (DMO) implemented in an HPE Aruba wireless network?

For an Aruba AOS-10 AP in mixed mode, which factors can be used to determine the forwarding role assigned to a client? (Select two.)

Using Aruba best practices what should be enabled for visitor networks where encryption is needed but authentication is not required?

Refer to Exhibit

A company has deployed 200 AP-635 access points. To take advantage of the 6 GHz band, the administrator has attempted to configure a new WPA3-OWE SSID in Central but is not working as expected.
What would be the correct action to fix the issue?

A customer has a site with 200 AP-515 access points 75AP-565 access points installed. The customer is rolling out new mobile phones with Wi-Fi-calling. 802.1X is in use for authentication What should be enabled to ensure the best roaming experience?

You are deploying a bonded 40 MHz wide channel What is the difference in the noise floor perceived by a client using this bonded channel as compared to an unbonded 20MHz wide channel?

A customer is using Aruba Cloud Guest, but visitors keep complaining that the captive portal page keeps coming up after devices go to sleep Which solution should be enabled to deal with this issue?

What are the requirements to ensure that WMM is working effectively’? (Select two)

Your manufacturing client is having installers deploy seventy headless scanners and fifty IP cameras in their warehouse These new devices do not support 802 1X authentication. How can HPE Aruba reduce the IT administration overhead associated with this deployment while maintaining a secure environment using MPSK?

A customer is looking for a wireless authentication solution for all of their loT devices that meet the following requirements
– The wireless traffic between the IoT devices and the Access Points must be encrypted
– Unique passphrase per device
– Use fingerprint information to perform role-based access
Which solutions will address the customer’s requirements? (Select two.)

Refer to the exhibit

A company has deployed 200 AP-635 access points. To but is not working as expected

What would be the correct action to fix the issue?

What steps are part of the Key Management workflow when a wireless device is roaming from AP1 to AP2? (Select two.)

Your customer is having issues with Wi-Fi 6 clients staying connected to poor-performing APs when a higher throughput APs are closer. Which technology should you implement?

A large retail client is looking to generate a rich set of contextual data based on the location information of wireless clients in their stores Which standard uses Round Trip Time (RTT) and Fine Time Measurements (FTM) to calculate the distance a client is from an AP?

You are doing tests in your lab and with the following equipment specifications:
• AP1 has a radio that generates a 20 dBm signal
• AP2 has a radio that generates a 8 dBm signal
• AP1 has an antenna with a gain of 7 dBI.
• AP2 has an antenna with a gain of 12 dBI.
• The antenna cable for AP1 has a 3 dB loss
• The antenna cable forAP2 has a 3 dB loss.
What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for AP1?

Which Aruba AP mode is sending captured RF data to Aruba Central for waterfall plot?

What is a primary benefit of BSS coloring?

With the Aruba CX 6000 24G switch with uplinks of 1/1/25 and what does the switch do when a client port detects a loop and the do-not-disabie parameter is used?